Residential SPF Roofing

Residential

The ultimate roof system for your building. Protection against leaks, weather, and increased energy savings.
Get a Quote

The best residential roof solution

  • Renewability
  • Waterproof & Seamless
  • Superior insulation with up to 30% energy savings
  • Prevent water ponding
  • Apply to any surface

If you have a flat roof or a flat roof area to your home, then Leak Busters Spray Foam and Coating systems is your best choice. The owners of Leak Busters Roofing are manufacturer qualified/recommended and are hands on because they actually spray your foam roof which is almost non-existent in the foam roofing industry. All other spray foam roofing contractors hire wage-based employees, so the applicator of your roof is not the owner. With Leak Busters Roofing, you will receive a custom foam roof applied by the owners themselves who make the foam roof process a pleasant and accommodating experience. Spray Polyurethane Foam (SPF) is a specialized application which requires a proper technique which is acquired over many years of experience and an understanding of minute details (Similar to a form of art). You will have a finished detailed owner applied masterpiece.

Our company applies a minimal of 1”- 2” inches as a standard foam thickness. 2” inch thickness will give your home more insulation and you more comfort knowing it will never be too hot or too cold anywhere in California. Our clients located in the hottest parts of the Central Valley & Southern California report a 15-20 degrees difference of the home in the summer without using air conditioning. The savings of a SPF roof system will pay for itself in no time! 

Leak Busters Roofing uses General Coatings Mfg. or BASF products only. You always know what product were sprayed on your roof and that our Coatings are not cheaper, less quality Coatings. These are the highest quality materials in the industry with up to 20-year guaranteed leak free warranties.

Structure of a Foam Roof

Spray Polyurethane Foam (SPF) is a spray-applied insulating roofing system. Two chemical liquid components (polyol/resin and an isocyanate) are combined as they pass through the spray gun and make contact at the surface of the roof. As both components chemically react with each other, they expand by 20 times in volume to form a solid, strong, and seamless foam surface with a compressive strength of 40-50 pounds per square inch and a density of 2.0-3.0 pounds per cubic foot.

Acrylic Elastomeric Coating is a sprayed fluid applied coating that is applied over the SPF roof. The base coat is typically dry within 2-4 hours and the topcoat is dry within 6 hours on a warm day with temperatures of 70-75 degrees.      

Spray Polyurethane Foam and Coating System

  1. Sprayed Polyurethane Foam is typically applied 1”-2” inches thick over an existing roof or wood deck (cap sheet, plywood, metal, or concrete).
  2. Acrylic Elastomeric Base Coat (Light Gray or Tan) is immediately applied to protect the foam roof from the sun’s UV rays.
  3. Acrylic Elastomeric Topcoat (White or Custom color match) is applied over the cured Base coat to provide long lasting durability.
  4. Optional granules are minerals applied for added wear resistance and protection from natural weather wear.

We've got you covered

Tell us about your project and one of our roofing specialists will reach out.